Miscellaneous Sliding Stall Doors

#CBDDNS5
Crossbuck Not Split
Dutch Door
Slider
4'3-1/2" width x
8'-0" height

**

	COMPLETELY ASSEMBLED WITH HARDWARE
	Nothing to put together
	No Lumber to Cut
	No loose Pieces
	Heavy Gauge Non-Rusting ALUMINUM Used Throughout Door
	Full height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
	Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
	Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
	Reinforced Header Channels (Square tubing welded to upper channel inside.)
	Centers of door panels receive two (2) center strips of 2"x1/8" flat bar placed strategically to create the appearance of a "split" Double Dutch Door.
	Panel of 3/4" BC Plywood bonded with glue and wood screws at back of doors.
	Painting or staining door lumber portion is recommended.
	Self-Cleaning Galvanized Overhead Door Track & Fasteners.
	Zinc Plated Superlatch and Latch Receiver Plates
	Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller.
	Smooth surface panels on "interiors" of doors (design on exterior side).
	Aluminum Door Stops Included.
	Check out the Double Dutch Doors

#ACLAD4X8SD5
Armour Clad Sliding Door
4x8 Diamond Plate
4'-0" width x
8'-0" height

**

	No Rust Aluminum Barn/Stall Door
	No Lumber to Maintain
	Designer Friendly
	Arrives Completely Assembled
	Door is 8'-0" Height and 4'-0" wide
	Heavy Gauge Non-Rusting ALUMINUM Used Throughout Entire Door Structure
	Full Height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
	Self-Cleaning Galvanized Overhead Door Track & Fasteners
	One Pair of Ball-bearing Heavy Duty Trolleys (Door Rollers)
	Aluminum Door Stops Included
	Zinc Plated Superlatch and Latch Receiver Plates
	Zinc Plated 10" Door Handle
	Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller

#SUPER4WX8HED
Tack & Feed Superstructure
4'-0" width x
8'-0" height

**

	COMPLETELY ASSEMBLED FRAME WITH HARDWARE
	LUMBER NOT INCLUDED
	Custom Sizes Available, Call Us with Your Specifics
	Standard Sizes Available
	Mount Door Frame Without Lumber then Level and Fill
	Receives 2” x 6” Lumber of Your Choice (1-1/2” two bys only)
	Doors Overlay Your Openings, 2” on each Vertical End or 4” Total
	Frames Saves on Labor, No Heavy Lifting or Large Crews
	Heavy Gauge, Non-rusting Aluminum used Throughout Frames
	Reusable Aluminum Door Frame, Simply Replace Lumber without Dismantling
	Horizontal and Vertical Tubing Reinforcements
	Full Height Vertical Reinforcements on Both Ends of Each Panel for Rigidity and Strength
	Permanent and Removable Cap Plates for Future Lumber Replacement
	Full Height Astragals
	Horizontal and Vertical Alignment Channels
	All Necessary Hardware Included
	Galvanized, Overhead, Self-cleaning and Self-aligning Round Track
	Heavy-duty Ball-bearing Trolley System
	Heavy-duty Adjustable Wall Mount Stay-roller
	Aluminum Door Stops Included
	10” Heavy Duty Zinc Plated Door Handles
	Wood Lags Provided for Track, Stop, Handle Installation

All Hardware Included With Doors


	Galvanized, overhead, Self-cleaning and Self-aligning Round Track		Zinc Plated Stall Latch


	Heavy-duty Aluminum Stops		Heavy-duty Adjustable wall mount Stay-roller

	Heavy-duty Ball-bearing Adjustable Door Trolley System

** Please note that items purchased will be through our affiliate website www.aluminumhorsestalls.com
and you will be advised of applicable shipping charges pertaining to specific orders after
quantity and destination are determined by a member of our sales team.